SwOS/RouterOS powered 24 port Gigabit Ethernet switch with two SFP+ ports, wire speed connectivity with several new switching features! It has “Dual boot” feature that allows you to choose which operating system you prefer to use, RouterOS or SwOS. If you prefer to have a simplified switch only OS with more switch specific features, use SwOS. If you are used to Winbox and would like the ability to use routing and other Layer 3 features on some ports in your CRS, boot and use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings.
It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules.
Description | Details |
---|---|
Product code | CRS326-24G-2S+RM |
Architecture | ARM 32bit |
CPU | 98DX3236 |
CPU core count | 1 |
CPU nominal frequency | 800 MHz |
Dimensions | 440 x 144 x 44 mm |
License level | 5 |
Operating System | RouterOS / SwitchOS |
Size of RAM | 512 MB |
Storage size | 16 MB |
Storage type | FLASH |
Tested ambient temperature | -40°C to 60°C |
PoE in | Passive PoE |
PoE in input Voltage | 10-30 V |
Number of DC inputs | 2 (DC jack, PoE-IN) |
DC jack input Voltage | 10-30 V |
Max power consumption | 24 W |
10/100/1000 Ethernet ports | 24 |
SFP+ ports | 2 |
Serial port | RJ45 |
The Cloud Router Switch 106-1C-5S is a desktop size smart switch, equipped with one Gigabit Ethernet / SFP combo port and five 1.25Gbps SFP cages. The package includes a power supply. Powered by a 400MHz CPU and 128MB RAM, it runs RouterOS with a L5 license and supports 11- 30V power.
Smart Switch, 5x SFP cages, 1x Combo port (SFP or Gigabit Ethernet), 400MHz CPU, 128MB RAM, desktop case, RouterOS L5
Description | Details |
---|---|
Product code | CRS106-1C-5S |
Architecture | MIPSBE |
CPU | QCA8511 |
CPU core count | 1 |
CPU nominal frequency | 400 MHz |
Dimensions | 114 x 137 x 29mm |
License level | 5 |
Operating System | RouterOS |
Size of RAM | 128 MB |
Storage size | 16 MB |
Storage type | FLASH |
Tested ambient temperature | -20°C to 70°C |
PoE in | Passive PoE |
PoE in input Voltage | 11-30 V |
Number of DC inputs | 2 (DC jack, PoE-IN) |
DC jack input Voltage | 11-30 V |
Max power consumption | 11 W |
Ethernet Combo ports | 1 |
SFP ports | 5 |
Serial port | RJ45 |
Cloud Smart Switch 326-24G-2S+RM is SwOS powered 24 port Gigabit Ethernet switch with two SFP+ ports in 1U rackmount case that provides wire speed connectivity with several new switching features. It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules.
SwOS powered 24 port Gigabit Ethernet switch with two SFP+ ports in 1U rackmount case.
Description | Details |
---|---|
Product code | CSS326-24G-2S+RM |
Dimensions | 440 x 144 x 44 mm |
Operating System | SwOS |
Storage size | 2 MB |
Storage type | FLASH |
Tested ambient temperature | -20°C to 70°C |
PoE in | Passive PoE |
PoE in input Voltage | 10-30 V |
Number of DC inputs | 2 (DC jack, PoE-IN) |
DC jack input Voltage | 10-30 V |
Max power consumption | 19 W |
10/100/1000 Ethernet ports | 24 |
SFP+ ports | 2 |
The home Access Point lite (hAP lite) is an ideal little device for your apartment, house or office. It supports button triggered WPS, for the convenience of not typing a complicated password when somebody wants to have wireless internet access, and can also be told to change to cAP mode and join a CAPsMAN centrally managed network by the push of a button. Of course, the device runs RouterOS with all the features, bandwidth shaping, firewall, user access control and many others.
The hAP lite is equipped with a powerful 650MHz CPU, 32MB RAM, dual chain 2.4GHz onboard wireless, four Fast Ethernet ports and a RouterOS L4 license. USB power supply is included.
Description | Details |
---|---|
Product code | RB941-2nD |
Architecture | SMIPS |
CPU | QCA9533 |
CPU core count | 1 |
CPU nominal frequency | 650 MHz |
License level | 4 |
Operating System | RouterOS |
Size of RAM | 32 MB |
Storage size | 16 MB |
Storage type | FLASH |
Tested ambient temperature | -20°C to 60°C |
MicroUSB input Voltage | 5-5 V |
Number of DC inputs | 1 (MicroUSB) |
Max power consumption | 3.5 W |
Wireless 2.4 GHz number of chains | 2 |
Wireless 2.4 GHz Max data rate | 300 Mbit/s |
Wireless 2.4 GHz standards | 802.11b/g/n |
Antenna gain dBi for 2.4 GHz | 1.5 |
Wireless 2.4 GHz chip model | QCA9533 |
10/100 Ethernet ports | 4 |
The home Access Point lite (hAP lite) is an ideal little device for your apartment, house or office. It supports button triggered WPS, for the convenience of not typing a complicated password when somebody wants to have wireless internet access, and can also be told to change to cAP mode and join a CAPsMAN centrally managed network by the push of a button. Of course, the device runs RouterOS with all the features, bandwidth shaping, firewall, user access control and many others.
The hAP lite is equipped with a powerful 650MHz CPU, 32MB RAM, dual chain 2.4GHz onboard wireless, four Fast Ethernet ports and a RouterOS L4 license. USB power supply is included.
Description | Details |
---|---|
Product code | RB941-2nD-TC |
Architecture | SMIPS |
CPU | QCA9533 |
CPU core count | 1 |
CPU nominal frequency | 650 MHz |
License level | 4 |
Operating System | RouterOS |
Size of RAM | 32 MB |
Storage size | 16 MB |
Storage type | FLASH |
Tested ambient temperature | -20°C to 70°C |
MicroUSB input Voltage | 5-5 V |
Number of DC inputs | 1 (MicroUSB) |
Max power consumption | 3.5 W |
Wireless 2.4 GHz number of chains | 2 |
Wireless 2.4 GHz Max data rate | 300 Mbit/s |
Wireless 2.4 GHz standards | 802.11b/g/n |
Antenna gain dBi for 2.4 GHz | 1.5 |
Wireless 2.4 GHz chip model | QCA9533 |
10/100 Ethernet ports | 4 |
hEX lite is a small five port ethernet router in a nice plastic case. Its price is lower than the RouterOS license alone - there simply is no choice when it comes to managing your wired home network, the RB750r2 (hEX lite) has it all. Not only it’s affordable, small, good looking and easy to use - It’s probably the most affordable MPLS capable router on the market! No more compromise between price and features - RB750r2 has both. With its compact design and clean looks, it will fit perfectly into any SOHO environment.
5x Ethernet, Small plastic case, 850MHz CPU, 64MB RAM, Most affordable MPLS router, RouterOS L4
Description | Details |
---|---|
Product code | RB750r2 |
Architecture | MIPSBE |
CPU | QCA9533 |
CPU core count | 1 |
CPU nominal frequency | 850 MHz |
Dimensions | 113x89x28mm. Weight without packaging and cables: 129g |
License level | 4 |
Operating System | RouterOS |
Size of RAM | 64 MB |
Storage size | 16 MB |
Storage type | FLASH |
Tested ambient temperature | -40°C to 70°C |
PoE in | Passive PoE |
PoE in input Voltage | 6-30 V |
Number of DC inputs | 2 (DC jack, PoE-IN) |
DC jack input Voltage | 6-30 V |
Max power consumption | 2 W |
10/100 Ethernet ports | 5 |
The SXTsq Lite5 is a compact and lightweight outdoor wireless device with an integrated antenna. Perfect for point to point links of up to 12 kilometers or as a CPE unit. It is compact, weatherproof and easy to mount. The SXTsq Lite5 retains a 16dBi antenna like the SXT Lite5, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced - the SXTsq is two times thinner.
The device can be mounted on horizontal and vertical poles and masts, but for precise alignment, separately available is the QuickMount Pro, which allows to adjust in every angle. SXTsq Lite5 (International) supports 5150MHz-5875MHz range.
Description | Details |
---|---|
Product code | RBSXTsq5nD |
Architecture | MIPSBE |
CPU | AR9344 |
CPU core count | 1 |
CPU nominal frequency | 600 MHz |
Dimensions | 129x129x34mm |
License level | 3 |
Operating System | RouterOS |
Size of RAM | 64 MB |
Storage size | 16 MB |
Storage type | FLASH |
Tested ambient temperature | -40°C to 70°C |
PoE in | Passive PoE |
PoE in input Voltage | 10-30 V |
Number of DC inputs | 1 (PoE-IN) |
Max power consumption | 6 W |
Wireless 5 GHz number of chains | 2 |
Wireless 5 GHz Max data rate | 300 Mbit/s |
Wireless 5 GHz standards | 802.11a/n |
Antenna gain dBi for 5 GHz | 16 |
Wireless 5 GHz chip model | AR9344 |
10/100 Ethernet ports | 1 |
The SXTsq 5 ac is a compact and lightweight outdoor 5Ghz 802.11ac wireless device with an integrated antenna, perfect for point-to-point links or as a CPE unit. The device includes one 10/100/1000 Mbit Ethernet port to fully utilize speeds that 802.11ac protocol provides. The SXTsq 5 ac retains a 16 dBi antenna like the SXT 5 ac, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced - the SXTsq is two times thinner.
Low-cost small-size 16dBi 5GHz dual chain integrated CPE/Backbone with AC support and Gigabit Ethernet. SXTsq 5 ac (International) supports 5150MHz-5875MHz range.
Description | Details |
---|---|
Product code | RBSXTsqG-5acD |
Architecture | ARM 32bit |
CPU | IPQ-4018 |
CPU core count | 4 |
CPU nominal frequency | 716 MHz |
Dimensions | 129 x 129 x 34 mm |
License level | 3 |
Operating System | RouterOS |
Size of RAM | 256 MB |
Storage size | 16 MB |
Storage type | FLASH |
Tested ambient temperature | -40°C to 70°C |
PoE in | Passive PoE |
PoE in input Voltage | 10-28 V |
Number of DC inputs | 1 (PoE-IN) |
Max power consumption | 7 W |
Wireless 5 GHz number of chains | 2 |
Wireless 5 GHz Max data rate | 867 Mbit/s |
Wireless 5 GHz standards | 802.11a/n/ac |
Antenna gain dBi for 5 GHz | 16 |
Wireless 5 GHz chip model | IPQ-4018 |
10/100/1000 Ethernet ports | 1 |
OmniTIK is a weatherproof outdoor AP with dual-polarized omni antennas - the perfect companion for our SXT, or for any other 802.11 standard device. Weatherproof, durable and ready to use. It has five 10/100 Ethernet ports, PoE support and a built-in 802.11a/n wireless radio. It supports Nv2 TDMA technology with up to 200Mbit aggregate throughput. LED signal indicators on it’s back are fully customizable, show Ethernet activity or wireless signal - or any other information from RouterOS. The USB port gives the ability to connect a 3G modem or a storage drive. The OmniTIK runs RouterOS with all it’s features
7.5dBi Integrated AP, 5GHz Dual chain, 5xEthernet ports. RBOmniTikU-5HnD (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
Description | Details |
---|---|
Product code | RBOmniTikU-5HnD |
Architecture | MIPSBE |
CPU | AR9344 |
CPU core count | 1 |
CPU nominal frequency | 600 MHz |
Dimensions | 368x125x55mm |
License level | 4 |
Operating System | RouterOS v5 and above |
Size of RAM | 64 MB |
Storage size | 16 MB |
Storage type | FLASH |
Tested ambient temperature | -40°C to 70°C |
PoE in | Passive PoE |
PoE in input Voltage | 11-30 V |
Number of DC inputs | 1 (PoE-IN) |
Max power consumption | 11 W |
Wireless 5 GHz number of chains | 2 |
Wireless 5 GHz Max data rate | 300 Mbit/s |
Wireless 5 GHz standards | 802.11a/n |
Antenna gain dBi for 5 GHz | 7.5 |
Wireless 5 GHz chip model | AR9344 |
10/100 Ethernet ports | 5 |
OmniTIK 5 ac features five Gigabit Ethernet ports and support for 802.11ac. It’s equipped with a powerful 720MHz CPU, 128MB RAM, high power 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE) and comes with a new design weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz omni antennas, a power supply, a PoE injector and a mounting kit.
OmniTIK 5 ac (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).7.5dBi Integrated AP, 5GHz Dual chain with 802.11ac support, 5x Gigabit Ethernet ports.
Description | Details |
---|---|
Product code | RBOmniTikG-5HacD |
Architecture | MIPSBE |
CPU | QCA9557 |
CPU core count | 1 |
CPU nominal frequency | 720 MHz |
Dimensions | 416 x 129 x 58 mm |
License level | 4 |
Operating System | RouterOS |
Size of RAM | 128 MB |
Storage size | 16 MB |
Storage type | FLASH |
Tested ambient temperature | -40°C to 70°C |
PoE in | Passive PoE |
PoE in input Voltage | 10-57 V |
Number of DC inputs | 1 (PoE-IN) |
Max power consumption | 14 W |
Wireless 5 GHz number of chains | 2 |
Wireless 5 GHz Max data rate | 867 Mbit/s |
Wireless 5 GHz standards | 802.11a/n/ac |
AC speed | AC1900 |
Antenna gain dBi for 5 GHz | 7.5 |
Wireless 5 GHz chip model | QCA9892 |
The RB951Ui-2HnD is a wireless SOHO AP with a new generation Atheros CPU and more processing power. It has five Ethernet ports, one USB 2.0 port and a high power 2.4GHz 802.11b/g/n wireless AP with antennas built in. It has a 600MHz CPU,128MB of RAM and PoE output function for port #5 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA.
2.4GHz AP with five Ethernet ports and PoE output on port 5. It has a 600MHz CPU, 128MB RAM and a USB port.
Description | Details |
---|---|
Product code | RB951Ui-2HnD |
Architecture | MIPSBE |
CPU | AR9344 |
CPU core count | 1 |
CPU nominal frequency | 600 MHz |
Dimensions | 113x138x29mm |
License level | 4 |
Operating System | RouterOS |
Size of RAM | 128 MB |
Storage size | 128 MB |
Storage type | NAND |
Tested ambient temperature | -20C +50C |
PoE in | Passive PoE |
PoE out | Passive PoE |
PoE in input Voltage | 9-30 V |
Number of DC inputs | 2 (PoE-IN, DC jack) |
DC jack input Voltage | 9-30 V |
Max out per port output (input < 30 V) | 500 mA |
Max total out (A) | 500 mA |
Max power consumption | 6.5 W |
Wireless 2.4 GHz number of chains | 2 |
Wireless 2.4 GHz Max data rate | 300 Mbit/s |
Wireless 2.4 GHz standards | 802.11b/g/n |
Antenna gain dBi for 2.4 GHz | 2.5 |
Wireless 2.4 GHz chip model | AR9344 |
10/100 Ethernet ports | 5 |
Number of USB ports | 1 |
USB Power Reset | Yes |
USB slot type | USB type A |
Max USB current (A) | 1 |
RouterBOARD cAP-2nD (ceiling Access Point) is our first 2.4GHz Dual-Chain ceiling AP. Inconspicuously designed, it blends into the environment, perfect for hospitality business like hotels, airports, shopping malls etc. cAP-2nD supports 802.11b/g/n and can be powered by PoE. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location.
Unlike traditional controller software, which requires a separate PC/Mac to run, our CAPsMAN runs on any existing RouterBOARD device in your network. No need for a separate controller machine. Everything is included to get you started, wall/ceiling mount, PoE injector, power adapter and even the screws and screw anchors.
Description | Details |
---|---|
Product code | RBcAP2nD |
Architecture | MIPSBE |
CPU | QCA9533 |
CPU core count | 1 |
CPU nominal frequency | 650 MHz |
Dimensions | 185mm diameter, 31mm height |
License level | 4 |
Operating System | RouterOS |
Size of RAM | 64 MB |
Storage size | 16 MB |
Storage type | FLASH |
Tested ambient temperature | -40°C to 70°C |
PoE in | 802.3af/at |
PoE in input Voltage | 11-57 V |
Number of DC inputs | 1 (PoE-IN) |
Max power consumption | 4 W |
Wireless 2.4 GHz number of chains | 2 |
Wireless 2.4 GHz Max data rate | 300 Mbit/s |
Wireless 2.4 GHz standards | 802.11b/g/n |
Antenna gain dBi for 2.4 GHz | 2 |
Wireless 2.4 GHz chip model | QCA9533 |
10/100 Ethernet ports | 1 |